Multi Deco Master

Description

Multi Decor Master is brushing multi color paint conjugated with out of common acryl, weather resistance pigment, and filler. Environmental friendly product designed to adopt for circumstance of high aesthetical value, Decor Master is elegance pastel tone and similar with picture technology to enjoy antique romanticism

Features

- Applying Place ; Concrete or Cement type ground, Gypsum Board, Wood, Steel, Etcetera, All kind surface
1. Living Space ; Apartment, House, Office, Hotel, Hospital, School, Kindergarten, Etcetera,
2. Sanitary and Invironmental Frendly Space ; Restaurant, Shop Etcetera
- Composition ; Major content is adopted to special emulsion, out of common pigment and additive of a sort
- Apperance ; Matt
- Finish : Delux pastel tone
- Dry Time; Followed coat : More than 9 Hours
(Based in dry film thickness 60micron in circumstance of enough ventilation and 20°C)
- S.G. ; About 1.1±0.05.
- Consumable amount ; about 6.0 ~ 10㎡/L
(Exact comsumable amout can be transformable according to required surface and final condition.)
- Flammable Point ; Non - Flammable material

Surface Treatment

- On Gypsum Board, Cement : After Cleaning surface clearly, Level with putty and after dry, sand rough part with sandpaper smoothly.
- On Wood : After proceeded applying of primer for wood and dry, carry on same treatment as cement.
- On old film : Take away loosen material such as dust or impurity and carry on same treatment as cement.
- On Metal : Take away all kind of rust, oil and impurity, etcetera. After anti-rust primer and dry, carry on same treatment as cement

Application Method

- Clean surface according to surface treatment instruction.
- Base ; Appy Multi Decor Primer or Emulsion, white to delute as 10 ~ 15% by clean water, one time, by brush, roller and spray
- Top ; After drying base, proceed final coating according to desired style as below:
Caution : Before applying, stir enoughly for particle not to be broken by wooden stick. Procceed to make regular pattern in term of same interval.
1. Coloring :
After adding emulsion colorant asserted, stir enoughly to be mixed completely
2. Brush application :
After 6hrs to dry base coat, apply on all surface to regular direction such as crsossed ?X? by brush step by step.
3. Scrapper rubbing :
After 15 ~ 20minuite, Rub by plastic scrapper, trowel smoothly or sweep dried surface by paint gloves all in all to tune color variation.
Dilute ;
1. Brush : After diluting as 5 ~ 10% by and large with clean water.