Decoration Paint

Model Number

Soft Stucco

A kind of the water based color wax paint to adopt emulsion, Soft Stucco is able to be displayed with soft and natural sense, antique effect. Because Color wax type should applicate together with Soft Stucco, surface's soft embossing effect is able to take in. Product designed to display alternative color effect by means of top's semi-transparent. Especially product is non-toxic, non-flammable, antifungal and excellent in water repellence.

Features

• Applying Place ; Concrete or Cement type ground, Gypsum Board, Wood, Steel, Etcetera, All kind surface Hotel, Luxury Accommodation, Department, Office Building, Bank, All Resort, Show Place, Etcetera Internal Finish
  
• Composition ; Major content is adopted to special emulsion, out of common pigment and additive of a sort
  
• Appearance ; Base - Mat, Off White. Top - Milky Semi clear. Clear, White, Earthy Yellow, Apricot, Lemon, Peach, Lilac, Yellowish Green, Light Green, Navy Blue
  
• Finish : Smooth feel
  
• Dry Time
  

  Clarification	Base	Top
  Solid Dry	More than 12 Hours	More than 5 Hours
  Full Dry	More than 3 days	More than 3 days
  Interval of Followed coat	More than 24 Hours	More than 5 Hours

  (Based in dry film thickness 1.0mm in circumstance of enough ventilation and 20°C)
• Physical Feature
  

  Clarification	Base	Top
  S.G.	About 1.45	About 1.02
  Volume Solid	About 45%	About 26%
  Consumable amount	1.0 ~ 1.5 Kg/m2	About 0.2 L/m2

  (Exact consumable amount can be transformable according to required surface and final condition.)
• Flammable point : Non-Flammable material
  

Surface Treatment

• On Gypsum Board, Cement : After Cleaning surface clearly, Level with putty and after dry, sand rough part with sandpaper smoothly.
  
• On Wood : After proceeded applying of primer for wood and dry, carry on same treatment as cement.
  
• On old film : Take away loosen material such as dust or impurity and carry on same treatment as cement.
  
• On Metal : Take away all kind of rust, oil and impurity, etcetera. After anti-rust primer and dry, carry on same treatment as cement.
  

Application Method

• Clean surface according to surface treatment instruction.
  
• Base ; Clean other material such as dust and impurity on surface to applicate.
  Caution : For the trowel or roller, spay application, coating be carried out each of about 1m² by turn. For the purpose of minimizing joint marks, leave the joints part and finish joint part in the end.
  1. At first, applicate SOFT STUCCO base at the same level by hera or Trowel.
  2. On wet surface, Make desired pattern to be touched, overlapped lightly by hera or Trowel and dry for 24Hours. Pattern work refer to Lumian Base work.
  
• Top : On embossed surface, applicate at same level to move with small circle type by sponge or roller wetting desired Color Wax Top. Before drying, touch up by brush, etc in order to display cloud and mist effect. Brush and Roller, cloth designed typically is able to be in place of sponge for applicator
  
• Dilute ;
  As a rule, dilution is not need and is able to dilute as 5% by and large with clean water in case of need.