Decoration Paint

Model Number

Silian

SILIAN is various functional interior and water based paint to adopt high-purified pearl and out of common elastic pigment. By means of light's darkness and turn, reflection, antique pattern's decoration effect and modern delication and elegance is able to be displayed. Especially, non - toxic, non-flammable, water-resistance, anti-corruption and sterilization, adhesion is excellent and product is attached to green product to be not tacky at all and to be come of silky sense.

Features

• Applying Place ; Concrete or Cement type ground, Gypsum Board, Wood, Steel, Etcetera, All kind surface Hotel, Luxury Accommodation, Department, Office Building, Bank, All Resort, Show Place, Etcetera Internal Finish
  
• Composition ; Major content is adopted to special emulsion, out of common pigment and additive of a sort
  
• Appearance ; transformable Gloss
  
• Finish : Pearl finish of silk feel
  
• Dry Time; Solid dry : Less than 4 Hours, Full Dry : More than 3 Days, Followed coat : More than 4 Hours (Based in dry film thickness 200micron in circumstance of enough ventilation and 20°C)
  
• S.G. ; About 0.98. Volume Solid ; About 35 %
  
• Consumable amount ; 4.5 ~5.5m²/L(Based in wet film thickness 200micron),
  (Exact consumable amount can be transformable according to required surface and final condition.)
  
• Flammable Point ; Non - Flammable material
  

Surface Treatment

• On Gypsum Board, Cement : After Cleaning surface clearly, Level with putty and after dry, sand rough part with sandpaper smoothly.
  
• On Wood : After proceeded applying of primer for wood and dry, carry on same treatment as cement.
  
• On old film : Take away loosen material such as dust or impurity and carry on same treatment as cement.
  
• On Metal : Take away all kind of rust, oil and impurity, etcetera. After anti-rust primer and dry, carry on same treatment as cement.
  

Application Method

• Clean surface according to surface treatment instruction.
  
• Base ; Applicate common water based paint of white or tinted color two time after thinning by fresh water. Spray is recommended to take in smooth surface.
  
• Top ; After drying, go to top coating according to desired pattern as below:
  Caution : For the trowel or roller, spay application, coating be carried out each of about 1m² by turn. For the purpose of minimizing joint marks, leave the joints part and finish joint part in the end.
  1. Trowel Type - Trowel Application :
  After application of SILIAN on drying SILIAN base by spray, scratch by rubber hera. All pattern have to be similar to each part and same method may be added to twice or three times in order to put away leaving part.
  2. Pad or sponge Type - Roller application :
  After applicate SILIAN on drying SILIAN base thinned as 15% by and large by brush or roller, Press normal emulsion paint by a pattern roller or pad, sponge.
  3. Pad Type - Spray application :
  Spray LUMIAN thinned as 20% by and large with normal pressure and Use a 6mm air nozzle or a 2.5-3mm nozzle. To prevent from dust coating, Spray have to keep on interval as 20~30cm between gun and surface.
  
• Dilute ;
  1. Brush, Roller : Less than 15%(Volume ratio)
  2. Spray : Less than 25%(Volume ratio)